Search

SHOE FINDER
Sidi Cycling Shoes
SHOE SIZE CONVERSION GUIDE
Wide Width Cycling Shoes
MENS WOMENS YOUTH
CLIPLESS PEDAL SYSTEMS
CYCLING SANDALS
MENS WOMENS YOUTH
COLD FEET
KEEPING FEET WARM IN COLD WEATHER
Home Cycling Shoes
Cycling Shoes & Pedal Systems

Cycling shoes are special shoes designed to attach to the bikes pedals via a clip-in system. Attaching shoes to the pedals improves the efficiency of the pedal stroke, by allowing the cyclist to pull on the upstroke, as efficiently as they push on the down stroke, resulting in a constant application of force through the entire 360 degree pedal rotation.

 

Pedal Rotation

 

Beginning cyclists don't need a clipless pedal system, and special cycling shoes. However, as you begin to ride longer distances, more frequently, most cyclists will begin to appreciate the added efficiency clipless pedal systems will provide.

Almost all clipless pedal systems work the same. There is a cleat attached to the sole of your bike shoe that fits onto, or into, a part of the pedal on your bike. To snap the shoe cleat into the pedal, the cyclist applies downward pressure. To release the shoe, the cyclist twists their heel outwards.

Clip In

Understanding how the clipless pedal system works will provide a better understanding of what to look for in a cycling specific shoe.

Remember: You need to buy cycling shoes that are compatible with the pedal system that you purchase. For more info on Clipless Pedal Systems click here!

How Cycling Shoes Should Fit

Cycling Shoes should fit "comfortably snug" and be designed for the type of cycling you will be doing.

Speaking in very general terms, there are two basic types of cycling shoes...

  • Shoes Designed for "Road Biking"- usually have exposed cleats, and are difficult to walk in.
  • Shoes Designed for "Off-road Cycling"- have recessed cleats, which are easier to walk in (a requirement for the bike/hike conditions of off-road cycling)

Each category of cycling shoe contains style and price differences based on the type of riding the shoe is designed for, and the materials used in the shoe.

A properly fitting cycling shoe should be "comfortably snug", and...
  • The heel cup should fit snug enough to hold the heel in place through the entire pedal rotation.
  • There should be even pressure on the instep when the shoe is laced and/or buckled up.
  • There should be a little toe room at the end of the shoe.
  • The shoe should hold your forefoot stable without pinching.
  • There shouldn't be any large areas of gaping or folds in the material.
  • The ball of your foot should lie at the widest portion of the shoe to allow for proper cleat positioning.

Men's Fit -vs- Women's Fit

The female foot is not just a scaled down version of the male foot. In general, a womens foot has a higher arch, narrower heel and a shallower first toe. The ball of a womens foot has a smaller circumference than a males. The circumference on the instep of a womens foot is also smaller. Both the ankle length, and the instep length are shorter than their male counterparts.

The anatomical differences in the male and female foot should be taken into consideration when purchasing cycling shoes. Women should look for shoes designed specifically to fit the anatomy of the female foot.

Difference between a man and a womens feet

Shoe Width

Most off the rack cycling shoes come in a standard width. However, some companies manufacturer select styles in narrow or wide widths. If you have extremely narrow, or extremely wide feet, look for manufacturers that offer shoes specifically designed to fit a narrow or wide foot. There are companies that manufacturer custom cycling shoes that can be designed to fit any size foot, or be designed to correct specific foot ailments..

Important Considerations When Purchasing Cycling Specific Shoes

  • The stiffer the sole- the greater the power transfer. (Carbon soles are stiffer than Carbon Composite or Nylon soles)
  • The more surface area of the foot that touches the sole of the shoe- the less energy is lost.
    (You want your shoe to fit your foot like a glove for best performance - Best fit- Custom Shoe made from a plaster cast of your foot, 2nd Best- Semi- Custom shoe with a customized footbed and/or heat molded upper)
  • The thinner the sole of the shoe- the less energy is lost.

Cyclists looking to improve performance will want to find a shoe that is comfortable and fits their foot like a glove.

The Sole of the Shoes

The closer your foot is to the pedal the more power is transferred to the pedal.

Remember: The stiffer the sole of your shoe, the more stable the platform to transmit power.

Lower Priced Cycling Shoes:

The material used in the sole of the shoe is a reflection of the quality of the shoe. Most lower end cycling shoes have an injection-molded plastic sole. Injection-molded plastic soles are more economical to produce, but are heavier, and not as stiff as the carbon fiber or fiberglass that is used in higher end shoes. As such, they are more flexible and do not transfer power as well as a "stiffer" soled shoe.

Mid-Priced Cycling Shoes:

The material used in most mid-range cycling shoes is a combination of plastic and carbon fibre, plastic and fibreglass, or an all carbon fibre sole. Adding carbon fibre, or fibreglass to a shoe is more expensive, but is makes the sole stiffer and lighterweight.

High-end Cycling Shoes:

All high-end competition level shoes use carbon fiber soles. Carbon fibre is lighweight and very stiff, providing a stable platform.

Materials Used In The Upper Part of The Shoe

Soft supple materials such as leather provide greater comfort and less break in time. Higher end shoes usally have a real leather upper, or a special synthetic microfiber upper that is specifically designed to wick moisture and breath. Lower price point shoes have a synthetic leather, or plastic upper.

Front Closure Systems

There are many different ways to fasten cycling shoes... laces, buckles, straps. The main concern is to make sure that there are no pressure points when the shoes are securely fastened. Pressure points can restrict blood flow to the feet causing them to become numb. You also want to make sure that there are no loose laces, or other loose parts that could get caught in the bicycles chain wheel and cause an accident.

Laces

The original, or "vintage" cycling shoes fastened with laces. Criss crossing laces made it possible to adjust the tension around the foot by adjusting the laces to provide even pressure on the foot. Laces are time consuming to adjust and need to be adjusted every time the shoe is taken off and put on. In addition, feet tend to swell as blood flows to the feet during exercise. Old fashioned laces do not provide any opportunity for a cyclist to adjust shoe closures while cycling. New technology advances have allowed manufacturers to provide cyclist with the ability to quickly and easily adjust closures while riding.

Boa Lacing System

Many shoe manufacturers have started using Boa Technologies "Boa Lacing System" in their higher end cycling shoes. The Boa lacing System tightens shoes laces using a dial which pulls laces with even force across the eye stays and into a reel. Because laces wind up inside the reel, there is no loose shoe laces that can get caught in the chain wheel while cycling. Because laces are pulled uniformly, pressure points are eliminated. For more info on the Boa Lacing System Click Here!

Boa Lacing System

Velcro® Straps

Velcro® Straps are used in a lot of the low to mid priced point shoes. They are quick and easy to open and close, and easy to adjust. The down side is that as the shoe gets old- and the Velcro® wears, the straps can loosen.

Micro-metric Buckles

Many manufacturers are also using a combination of Velcro® straps and a "Micro-metric buckle" which allow the cyclist to easily adjust the tension of the shoe while cycling.

Micro-metric Buckel

The Tongue Of The Shoe

The tongue of the shoe should be padded for comfort, and should not bunch when closures are tightened.

The Heel Of The Shoe

Heel slippage can cause severe discomfort and injure the foot by creating blisters and other irritations. When trying on any cycling shoes, make sure that your heel is held securely in the shoes... stand on your toes and make sure your heel does not slip in and out of the shoe. The heel should stay firmly in place through the entire pedal rotation to avoid skin irritation and blisters.

Reinforced Heel Cups

Most mid-priced and high-end cycling shoes have a reinforced heel cup. The reinforced heel cup is a little plastic insert used to reinforce the heel of the shoe to increase support. It cradles the heel and prevents the heel from slipping out of the shoe while riding.

Adjustable Heel Retention Device

High-end cycling shoes have an adjustable heel retention device that reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s ankle. The device can be adjusted while riding. The heel retention device tightens the top of the heel cup so that it doesn’t slide-out during steep climbs or sprints.

Adjustable Heel Retention Device

Cycling Shoes Designed for Specific Types of Riding

Road Bike Shoes

Road biking shoes are designed for speed. In general they have a very narrow profile designed to hold the foot, especially the heel, in place. Road bike shoes are lightweight, aerodynamic, with extremely stiff soles for greater power transference.

Almost all shoes designed for road biking have an exposed cleat system. This is so the entire sole of the shoe can be made from a very stiff material, such as carbon. The stiffer the sole of your shoe, the more stable the platform to transmit power. The downside of having a very stiff sole, and exposed cleat is that it is very difficult to walk in these type of cycling shoes. Some companies are now adding a rubber heal tip to the shoe, and offering rubber cleat covers that can be put over your cleats for those times that you need to get off your bike and walk. For more info on Road Bike Shoes for Men Click Here! For Women Click Here!

Mountain Bike Shoes

Mountain biking shoes have recessed cleats, and a slightly more flexible rubber sole designed to let the cyclist walk when needed. The rubber soles have large tread patterns that make walking on steep, muddy, or otherwise unrideable terrain much easier. When purchasing mountain bike shoes and a compatible clipless pedal system, always consider how mud and debris are cleared from the shoes and cleats during clip in. For more info on Mountain Bike Shoes for Men Click Here! For Women Click Here!

Touring Shoes

Bicycle touring is all about taking a trip on your bike. That means that you need to be able to carry all the stuff you intend to bring with you, on your bike. The amount of gear that you can carry is limited. As such, most touring cyclist carry gear that is multi-functional. Touring cyclists ride a lot of miles on their bikes each day, and will benefit from the performance of a clipless pedal system. However, they also need to be able to walk comfortably when they are not cycling, and have a pair of shoes that doen't necessarily look like a cycling specific shoe. The choice is to carry several pairs of shoes, or to find a cycling specific shoe that looks like a normal street shoe, and is comfortable to walk in. Shoes designed for touring should have recessed cleats, and a more flexible rubber sole so that the cyclist can be as comfortable walking while off the bike, as they are efficient when riding the bike. There is an amazing selection of shoe options available to the touring cyclist. From tennis shoes, to hiking boots and even sandles- all designed for style, comfort, and performance both on the bike and off. For more info on Off-Road Touring Shoes for Men Click Here! For Women Click Here! For more info on Road Touring Shoes for Men Click Here! For Women Click Here! For more info on Cycling Sandals for men Click Here! For Women Click Here!

Downhill Cycling Shoes

Downhill racing is a true test of nerve, and one's ability to control their bike under extreme conditions. The concept is to get down the mountain as fast as possible. Downhill courses usually contain a succession of big jumps and drops over rocks, trees and other obsticals. The ride is all about controlling your bike at high speeds- breaking... cornering... riding to the edge of one's ability.

Downhill apparel is all about protection... "body armor".

Downhill cyclists use a large platform pedal. Clipless versions of downhill platform pedals are similar to a mountain bike clipless pedal, except the platform shaped exterior has a larger pedal area designed to allow your feet come on and off the pedals easier while planting turns.

Downhill shoes are similar to mountain bike shoes but have greater ankle support and reinforced toe caps. The soles of downhill shoes are designed to provide increased grip on the large flat pedals. For more info on Mountain Bike Shoes for Men Click Here! For Women Click Here!

BMX CYCLING SHOES

BMX shoes look, and feel like soft, flat-bottomed skateboard shoes. Most models come with or without clipless pedal compatibiity. Flat-bottomed shoes without clipless pedal compatibiity make stunt performance much safer because they allow you to get your feet off the pedals faster than clipless pedals. However, some riders still perfer the added performance of being connected to the bike with a clipless pedal system.

TRIATHLON CYCLING SHOES

Triathlon shoes are predominatly road bike shoes with some special features. Triathlon shoes are all about speeding up transition times... saving time changing apparel between the swim and bike, and the bike and run. Many cycling shoes designed specifically for Triathlon have a lined inner that can be worn sock-free for a quicker transition between the bike and run. Most triathlon shoes will have a heel loop for faster transitions and Velcro strap closures so that shoes can be taken on and off quickly and adjusted while on the bike.

INDOOR CYCLING SHOES

Indoor cycling shoes are a recent development. With the growing popularity of organized indoor cycling classes, these shoes are a hybrid of road and touring shoes. They have a firm sole and limited traction. The material of the indoor cycling shoe is lighter and thinner, to maximize comfort, coolness and breathability for the hot, conditions found in most indoor gyms.

RocketTheme Joomla Templates