Technical Fabric Library

Fabric Library

| A | B| C | D| E | F | G | H| I | J| K | L | M | N| O | P| Q | R | S | T| U | V| W | X | Y | Z

3M SCOTCHLITE REFLECTIVE MATERIAL® is a registered trademark of 3M Corporation® is used as trim on cycling clothing for added visibility at night and in low light situations. This reflective material returns light back to a light source- such as vehicle headlights- creating a bright image that motorists are more likely to see from a distance.

ABLETEX® is a registered trademark of Formosa Taffeta Co., Ltd.®. Abletex® is a waterproof, breathable fabric that is made by laminating an extremely thin film to a base fabric. The film ensures uniform pore size facilitating high moisture permeability without being stiff and uncomfortable.

ACTIVENT® is a registered trademark of W. L. Gore ® Associates. Activent® is an ultra-thin and lightweight membrane that is laminated to polyster or nylon creating a breathable, windproof, water resistant fabric used in outerwear.

AIRLITE is a lightweight microfiber polyester used in jackets and outerwear. Airlite is windproof and water resistant by construction. The extremely fine denier yarns provide a dense, tight weave and soft, supple hand.

AIRSHUT™ is a registered trademark of Tomen Corporation. Airshut™ is a durable water repellent fabric with a high moisture-vapor permeability, and oil and soil repellency. AIRSTRIPE®, a registered trademark of Eschler®. Airstripe® is a special fabric made of polyester yarn designed especially for cycling pads. The antibacterial fabric is composed of rib stitches which increase air circulation resulting in rapid transportation of perspiration away from the body.

AKWATEK® is a registered trademark of Comfort Technologies, Inc licensed to Alice Lace Co., Ltd of Taiwan. Akwatek® is a finish that is applied to polyester based fabrics to help warm or cool the body during outdoor activity. Akwatek® pulls moisture away from the body, and creates a vapour barrier that cools the body in warm temperatures, and warms the body in cold temperatures. Unlike most moisture transport fabrics that rely on fabric construction or chemical coatings to pull sweat away from the body, Akwatek® modifies the molleculer structure of the fiber providing a "chemical magnet" which uses the inherent properties of water to move it away from the body as needed. Termed "electrochemical transport", this process separates and moves molecules of water using the positive and negative charges contained in each individual molecule. As a result, garments made of Akwatek® can heat one area of the body while cooling another.

AKWADYNE® is a registered trademark of Comfort Technologies, Inc licensed to Alice Lace Co., Ltd of Taiwan. Akwadyne® is a finish that is applied to nylon based fabrics to help warm or cool the body during outdoor activity. Akwadyne® pulls moisture away from the body, and creates a vapour barrier that cools the body in warm temperatures, and warms the body in cold temperatures. Unlike most moisture transport fabrics that rely on fabric construction or chemical coatings to pull sweat away from the body, Akwadyne® modifies the molleculer structure of the fiber providing a "chemical magnet" which uses the inherent properties of water to move it away from the body as needed. Termed "electrochemical transport", this process separates and moves molecules of water using the positive and negative charges contained in each individual molecule. As a result, garments made of Akwadyne® can heat one area of the body while cooling another.

AMARA® is a registered trademark of Kuraray Co., Ltd.® AMARA®is a synthetic suede material made up of bundles of super fine fibers locked together with polyurethane resin. Because it has the same composition as natural leather, it closely resembles leather in its surface feeling, appearance, durability, and air permeability.

AM/P2 POLYOLEFIN® is a registered trademark of Coville, Inc.® AM/P2 Polyolef® is an antimicrobial polyolefin. The P2 fibers transport moisture away from the body while having the highest insulating power of any fiber for it's weight.

ANIMIAL LYCRA® is much heavier than standard Lycra®. The fabric has a firmer stretch and greater support.

AQUAFLO® is a registered trademark of H. Warshow & Sons, Inc.® Aquaflo® is a Nylon/Spandex fabric designed to allow fabric to absorb moisture and spread it over a wider surface for faster evaporation, keeping the cyclist cool, dry and comfortable.

AQUAMIRACLE® is a registered trademark of Tomen Corporation. Aquamiracle® is a lightweight, quick-drying, sun protection fabric. The face of the fabric is Sunpaque®, a fiber that contains a high-density titanium core that blocks UV rays. The inside of the fabric is made of a Technofine® yarn for moisture transfer.

AQUAPASS® is a registered trademark of Fabritex®. Aquapass® is a topical finish that transfers moisture through fabric away from the skin.

AQUA SHELL® see POLARTEC® AQUA SHELL®

Back to the top

BIOFRESH® is a registered trademark of Sterling Fibers®. BioFresh® is an antimicrobial acrylic fiber that inhibits the growth of bacteria and fungi.

Back to the top

CHALLENGE® is a registered trademark of Hyosung Corporation®. Challenge® is a 3-layer nylon polyurethane laminate in a ripstop construction. The membrane is a non-porous, hydrophilic polyurethane, that is The fabric is waterproof, windproof, and breathable.

COOLMAX® is a registered trademark of Invista CoolMax® is made of Dacron® fibers. Dacron®'s four channel fibers create a greater surface area allowing CoolMax® to rapidly move moisture away from the body to the outer layer of the fabric, where it evaporates.

COMFORTREL® is a registered trademark of Wellman, Inc. Comfortrel® is a synthetic filament fiber that is blended with Spandex to create fabrics for hosiery and form fitting active wear. The fiber is engineered to be stronger than polyester, but maintain a soft feel. Fabrics with Comfortrel are breathabile and wick moisture as a result of chemically-based process that provides climate control for an active person.
COMFORTREL PLUS® is a second generation of Comfortrel® that was designed to dye easier and hold color longer. Comfortrel Plus resists wrinkling, shrinking, and pulling out of shape.

CORDURA® is a registered trademark of E.I.DuPont de Nemours and Co. The Cordura® brand represents a line of nylon based fabrics that were designed for durability and abrasion resistance.

Back to the top

DERMIZAX® is a registered trademark of Toray Industries®. Dermizax® monolithic membrane is laminated between two layers of fabric to create a waterproof, breathable fabric used in outerwear. Dermizax® allows perspiration vapour to escape rapidly and evaporate through the outer layer while remaining completely waterproof. The ultra-thin membrane efficiently controls moisture permeability depending on the microclimate temperature.

DRYLETE® is a registered trademarks of Hind®, a division of Saucony®, Inc. Drylete® is a moisture management fabric that works by blending different denier nylons together to pull moisture away from the body and spread body perspiration over a greater surface area. Variations on the Drylete® fabric technology allow Hind® to achieve specific technical properties for different climate conditions:
DRYLETE MESH is a blend of hydrophobic polyester yarns and Lycra® in a mesh construction that lets air in while remaining opaque. Air and water pass through fibers, but UV exposure is minimized,
DRYLETE AC is a blend of polyester, nylon and Lycra®, designed to provide superior push-pull moisture-management technology in a stretch fabric.

DRYLINE® is a registered trademark of Millikin & Co.® Dryline® combines nylon, polyester and Lycra® to create a push-pull moisture-transport technology. The hydrophobic poly inner layer pulls moisture away from the skin and pushes it to the nylon outer layer where it evaporates quickly.

DRILITE EXTREME® is a high performance waterproof, windproof, breathable monolithic, hydrophilic membrane laminate that responds to temperature becoming more breathable as you become more active. Because of its elasticity, it is ideal for stretch panels in the knees and seat areas. Available in 2 and 3 layer contructions.

DURAPEL® is a registered trademark of Burlington Industries, Inc. Durapel® is a fluorocarbon, water-repellent finish that is applied to shell fabrics.

DURASPUN® is a registered trademark of Solutia, Inc.®. Duraspun® is an acrylic microfiber used is socks. Duraspun® has a soft hand, is colorfast, and wicks moisture.

Back to the top

ENTRANT® is a registered trademark of Toray Industries®. Entrant® is a waterproof, breathable fabric made with a three-layer coating structure that incorporates two different microporous layers. The inner layer allows perspiration to escape from the skin during exercise while the exterior layer is waterproof.

EPIC BY NEXTEC® is a registered trademark of Nextec Applications, Inc.® EPIC by Nextec® is a pattented process that encapsulates individual fibers with a micro-thin polymer, resulting in a finished fabric that is windproof, water resistant, and breathable.

eVENT® Fabric is a registered trademark of BHA TechnologiesInc.® eVENT® Fabric is a Direct Venting® waterproof barrier that uses ePTFE (expanded Polytetrafluoroethylene) laminate technology. The patented Dry System® technology, allows perspiration to dissipate and vent without saturating the inside of the fabric. At the core of eVENT Fabric is an ePTFE film that has been rendered oil-repellant, and thereby free from body-oil contamination, via a method that retains both the inherent open-pore structure of the membrane as well as its hydrophobic properties.

Back to the top

FIELDSENSOR® is a registered trademark of Toray Industries®. Fieldsensor® is a technical fabric designed to wick moisture through fabric construction. The spaces between fibers decrease in volume as you move from the fabric's inner surface to its outer surface. The high-volume spaces near the skin quickly absorb moisture and transport it away from the skin to the outer surface, where increased capillary action disperses the moisture for quick evaporation. Torray combined the Fieldsensor® technology with the four-way stretch of spandex for the manufacturer of form fitting garments such as bike shorts and tights.

Back to the top

GELANOTS® is a registered trademark of Tomen Corporation. Gelanots® products include waterproof, breathable membranes that can be laminated to fabrics, and waterproof breathable coatings that can be applied to fabrics to make them waterproof.
Lamination products Include:
GELANOTS® IMPACT Gelanots® most durable waterproof laminate features a microporous coating over the Gelanots® membrane.
GELANOTS® EKS LIVE is a brand-new breathable polyester fabric. Its chemically active function of moisture-absorption and discharge reduces thermal and hydrophillic stress to the body. The increased breathability and lower dew content is semi perpectual due to polymerization.
GELANOTS® DRY HEAT is a lightweight, highly breathable laminate for down or synthetic jackets and sleeping bags.
GELANOTS® INSERTS are breathable, windproof and waterproof liners for gloves, hats and garments.
GELADRAGE® is a line of waterproof, windproof, breathable laminates that offer a very high degree of breathability with a "soft hand" finish.
Coating products Include:
GELANOTS® COATING A wind-resistant, waterproof, moisture permeability coating used in outerwear and rainwear, provides a balance between waterproofness and breathability.
DR COATING A lightweight, highly breathable coating that is wind and water resistant.
GX-PR COATING A lightweight durable coating with a high moisture permeability designed for use in rainwear.
PROTEIN-TEX COATING is a new colored polyurethane coating that is hydrophobic and microporous. The Protein-Tex coating incorporates a protein-based powder, which greatly improves breathability and makes the coating very smooth when used in unlined garments.
AIRDRIVE™ a new type of coating that is highly breathable and condensation resistant, designed to provide an ideal Micro-Climate within clothing.

GINNY® FIBER is a registered trademarks of Solutia, Inc.®. Ginny® is an acrylic microfiber used is socks. Ginny® Fiber has a soft hand, is colorfast, and wicks moisture.

GORE-TEX® is a registered trademark of W. L. Gore ® Associates. The Gore-Tex® membrane is specifically engineered to form an impenetrable barrier against wind and water while maintaining breathability. The patented Gore-Tex® membrane is laminated to various outer layer fabrics (usually nylon or polyester)- referred to as a "2-ply laminate"; and sometimes an additional lining fabric designed to wick moisture away from the body- referred to as a "3-ply laminate". All Gore-Tex® laminated fabrics are windproof, waterproof and breathable.
GORE-TEX PACLITE® is a waterproof membrane that is laminated to lightweight, nylon to produce a waterproof, breathable fabric that is extremely lightweight and easy to pack. The Gore-Tex Paclite® membrane allows perspiration vapour to pass through but is more breathable because of raised nubs (or dots) applied to the membrane to protect the membrane from body oils, and other environmental contaminants from altering the waterproofness of the membrane.
GORE-TEX XRC® is a three layer waterproof, breathable fabric. The Gore-Tex membrane is laminated to a taffeta liner to protect the membrane, making a favric that is durable, lightweight, waterproof and extremely breathable. Back to the top

HYDRATOR® is a registered trademarks of Hind®, a division of Saucony®, Inc. Hydrator® is a polyester based fabric that utilizes two different surface textures to manage moisture. The smooth inner surface absorbs moisture and pushes it to the breathable open texture of the outer surface for rapid evaporation. Variations on the Hydrator® fabric technology allow Hind® to achieve specific technical properties for different climate conditions:
BRUSHED HYDRATOR MESH 100% polyester in a mesh construction allows air to circulate while it lays comfortably against the skin. The mesh construction lets air in while remaining opaque. Air and water pass through fibers, but UV exposure is minimized.

HYDROFLEX®is a registered trademark of Consoltex®. Hydroflex®is a polyurethane-based coating that is laminated to nylon or polyester to creates a durable, waterproof, breathable, wind-resistant fabric used in outerwear.

HYDROWEAVE® is a registered trademark of AquaTex Industries, Inc.®. HydroWeave® is a three-layer composit fabric that combines special hydrophilic fibers (fibers that attract water) and hydrophobic fibers (fibers that reject water) into a fibrous batting core. The batting is sandwiched between a breathable outer shell fabric and a thermally conductive, inner lining. Hydroweave® separates the wearer from moisture, and acts as the critical conduit for exchanging user heat with cooling comfort. Soaking Hydroweave in water for five minutes activates the cooling process, charging the hydrophilic fibers with moisture. The hydrophobic fill evenly distributes and surrounds the charged fibers with air, creating an ideal environment for evaporation. When moisture in the batting evaporates, heat is removed, cooling the surrounding area while the conductive lining transfers cooling to the wearer. When in contact with the wearer’s skin heat passes directly from the body to Hydroweave based on the difference in temperature between the body and the garment. The heat that transfers to Hydroweave is released to the outside environment by evaporation of the water in the garment. Because of the even distribution of water-absorbent polymer throughout Hydroweave’s batting, cooling is provided evenly throughout the entire garment and can continue to cool for up to eight hours depending on the degree of garment contact, environmental conditions, wearer physical activity, and type of outer clothing worn.

Back to the top

INCYTE is a Brushed Tactel®/Lycra® with an Aquapass® finish.

INNOVA®, is a registered trademark of American Fibers and Yarns Co. Innova® is a filament polyolefin (polypropylene) yarn used in base layer fabrics because of its moisture-management, insulative and quick-drying properties. Innova® is a hydrophobic yarn, "water hating", meaning that no moisture is absorbed into the fiber. Perspiration moves away from the skin along the shaft of the fiber to the outside of the garment to be evaporated. Innova® polyolefin has the lowest thermal conductivity rating of all natural and synthetic fibers. Thermal conductivity is the rate at which a substance loses heat. Because of Innova's® low rating, garments retain body heat allowing the athlete cool down slowly after exercising without getting chilled.

INTERA®, is a registered trademark of Intera Technologies, Inc. Intera® fabrics have a hydrophilic (water loving) molecule bonded to the surface of the fiber. This molecule attracts the water and spreads it out over a greater surface area, where it rapidly evaporates.

Back to the top

LYCRA®, is a registered trademark of E.I.DuPont de Nemours and Co. Lycra® is a man-made elastomeric fiber, known as spandex in the US and Canada and as elastane in Europe.
In technical terms, Lycra® is a "segmented polyurethane." While Lycra® appears to be a single, continuous thread, it is actually a bundle of tiny filaments. It's this unique molecular structure that gives LYCRA® its built-in, lasting elasticity. Stretch it four to seven times its original length, yet the fiber still returns to its starting size once the tension is released.
Lycra® is used in a lot of cycling apparel because it allows the garment to fit like a second skin without being uncomfortable and binding. The higher the Lycra® content in a fabric, the more stretch and recovery the fabric will have.

Back to the top

OUTLAST®, is a registered trademark of Outlast Technologies, Inc. The Outlast® brand represents a line of temperature regulating fibers and fabrics that contain millions of micro-thermal spheres used to create a dynamic thermal barrier that regulates the micro-climate next to the skin to maintain warmth and comfort, despite changes in outside temperature. These micro-thermal materials absorb, store, distribute, and release heat in response to the body's comfort needs.

Back to the top

PERTEX®, is a registered trademark of Perseverance Mills Limited. The Pertex® brand represents a range of high performance fabrics used in outdoor sportswear, sleeping bags and parachute canopy's. The combination of microfine filament yarns and extremely tight fabric weave, make Pertex® fabrics highly windproof and downproof. The fabric's high density weave enhances insulation by trapping more air. Because Pertex® is so lightweight and low in bulk, the loft of the insulating material is maintained.
PERTEX MICROLIGHT used in outerwear, is constructed using a DWR finish. DWR+ is a unique durable water-repellent treatment which encapsulates each filament of the fabric with a hydrophobic polymer. The DWR treatment makes the fabric water repellent. Because the individual filament yarns are coated, the treatment remains effective after washing, and does not impair breathability.

PITTARDS®, is a registered trademark of Pittards PLC Corporation United Kingdom. The Pittards® brand represents a line of leathers that incorporate unique tanned-in permanent processes that give real leather technical properties such as breathability and abrasion resistance as well as keep the leather soft as it ages.
PITTARDS® ARMORTAN® uses a new technology to improve the abrasion resistance of basic glove leather. ARMORTAN® is a new generation of chemistry which encases the fibril bundles within the leather structure with microscopic ceramic "armor plates" increasing the durability of the leather by preventing wear on contact surfaces and materials.

POLARTEC®, is a registered trademark of Malden Mills. The Polartec® brand represents a range of technical, polester fleece fabrics for Next-To-Skin, Thermal Insulation, and Weather Protection applications.
POLARTEC® POWER DRY® is a line of base layer fabric designed to pull sweat away from the body. This fabric features a patented bi-component knit construction that uses different yarns on either side of the fabric creating two different surfaces- one that is optimized to move moisture away from the skin, the other to dry quickly.
POLARTEC® POWER STRETCH® is a line of base layer fabric that combines a patented bi-component knit construction with lycra resulting in a moisture wicking fabric with 4-way stretch.
POLARTEC® CLASSIC® is a line of polyester fleece fabrics designed for thermal insulation. In addition to providing warmth without weight, they dry quickly, and are breathable. Polartec® Classic® 100 is a lightest weight used for warm first layers or lightweight sweaters. Polartec® Classic® 200 is a mid-weight fabric. Polartec® Classic® 300 is the heaviest fabric and is designed for warm thermal layers and very cold outdoor activities.
POLARTEC® WINDPRO® is a line of wind-resistant polyester fleece designed for weather protection applications. Proprietary yarns and tight construction block wind. The durable water-repellent surface sheds rain and snow. Textured inner surface traps air and provides a high warmth-to-weight ratio.
POLARTEC® WINDBLOC® is a line of wind-proof polyester fleece fabrics that offers maximum protection from the cold and wind. These fabrics combine the warmth of Polartec® thermal fleece with a polyurethane barrier membrane that is windproof and waterproof.
POLARTEC® WINDBLOC® ACT is a line of wind-resistant polyester fleece fabrics designed with Patent-pending Air Control Technology® (ACT) that enhances the breathability of Polartec® Windbloc®. (ACT) enables the fabric to block 98% of the wind. The remaining 2% is allowed to circulate within the fabric, which greatly enhances moisture vapor transmission. Polartec® Windbloc® ACT is constructed with a breathable stretch-polyurethane membrane, with durable water repellency to shed rain and snow. Versions are available that feature a Polatec® Power Dry® lining for moisture management.
POLARTEC® POWER SHIELD® ACT was desinged to reduce the weight and number of layers needed to insulate and protect. Polartec® Power Shield® ACT is a line of wind-resistant polyester fleece fabrics that feature a smooth, tightly woven nylon face for abrasion resistance and velour back that traps air and provides a high warmth-to-weight ratio. Polartec® Power Shield® ACT fabrics are designed with Patent-pending Air Control Technology® (ACT) that enhances breathability. (ACT) enables the fabric to block 98% of the wind. The remaining 2% is allowed to circulate within the fabric, which greatly enhances moisture vapor transmission. All Polartec® Power Shield® fabrics are constructed with durable water repellency to shed rain and snow. A Spandex versions offer 4 -way stretch for unrestricted freedom of movement. These fabrics are ideal for skiing, snowboarding, winter climbing and back-country trekking. They are used in jackets, pants, bibs, hats, and gloves.
POLARTEC® AQUA SHELL® fabrics feature the warmth of Polartec® thermal fabrics, combined with bodyhugging 4-way stretch and a windproof membrane. These fabrics are designed to replace neoprene and spandex skins for many water sports. The 4-way stretch provides a comfortable, non-restrictive fit. Polartec® Aqua Shell® fabrics have a sun protection rating of (UPF 30+). There are two versions of Polartec® Aqua Shell® fabrics available:
1) The nylon-faced version is equivalent in warmth to 2.5 mm neoprene; it is windproof, water-repellent, and offers great abrasion protection. Good breathability makes it ideal for warm-water diving and as an insulating base layer for above-water sports. It also provides warmth and wind protection in action speed sports like cycling and skiing.
2) The skin version is windproof and waterproof, and can be seam-sealed. Its surface sheds water to minimize evaporative heat loss, making the fabric ideal for an outer layer in above-water sports. POLARTEC® AQUA SHELL® fabrics are neutrally buoyant, reducing the amount of extra weights necessary for diving.

POLYSENTRIC®, is a registered trademark of DashAmerica, Inc. Polysentric® is a hydrophobic polyester fabric used in cycling jerseys proprietary to Pearlizumi®. The polyester pushes moisture away from the skin, to the outside of the fabric, where it is spread over a greater surface area, for rapid evaporation.

POWER STRETCH® see POLARTEC® POWER STRETCH®

PIMA® COTTON is a registered trademark of Supima Association of America Corporation. Supima® is the promotional organization of the American Pima cotton growers that oversee a licensing program in which select mills, apparel and textile manufacturers, and retailers are granted a license to use the Supima® trademark to market and promote their textile and apparel products made of 100% American Pima® cotton.

PROCORE® is a registered trademark of Hind®, a division of Saucony®, Inc. Procore® fabric is a blend of rayon, polyester and Lycra®. Lycra provides form-fitting stretch. Rayon creates a soft cotton-like feel. Polyester wicks moisture.

Back to the top

RAINOUT®is a registered trademark of Difco Performance Fabrics, Inc. of Canada. Waterproof breathable coated semi-transparent membrane.

REFLEXITE®is a registered trademark of Reflexite Corporation. Reflexite® is a reflective material that uses a microprism technology to return light back to a light source- such as vehicle headlights- creating a bright image that motorists are more likely to see from a distance. Reflexite® is used as trim on cycling clothing for added visibility at night and in low light situations.

Back to the top

SENSURA®is a registered trademark of Wellman Inc. Sensura® is a synthetic fiber that has the look and feel of combed cotton. Because it is a polyester based fabric, it wicks moisture better than natural cotton.

SPANDURA®Spandura is a fabric that combines the toughness of Cordura® with the stretch of Lycra®.

SPORTWOOL® is a registered trademark of Woolmark Americas, Inc. dba The Woolmark Company. Sportwool® combines man-made fibre technology with Merino Wool to achieve a line of technical wool fabrics that have the ability to wick moisture, control temperature, and are weatherproof.

SUNPAQUE® is a registered trademark of Tomen Corporation. Sunpaque® sports material contains high-density titanium in the core of each fiber. The titanium core prevents Sunpaque® from being transparent, even when wet, blocking UV rays, providing exceptional sun protection.

SUPERROUBAIX® is a registered trademark of ? The elite winter weight fabric with two-way stretch and brushed back for extra warmth, made from nylon and elastane. Superroubaix® is a registered trademark of MITI S.P.A.

SUPPLEX® is a registered trademark of E.I.DuPont de Nemours and Co. The Supplex® brand represents a line of state-of-the-art nylon fabrics specially engineered to provide the soft, supple touch of cotton with the strength, durability and performance advantages of nylon.

SYMPATEX® is a registered trademark of Sympatex Technologies. Sympatex® is a 3-ply hydrophillic laminate used in cycling rain gear.

Technofine® is a registered trademark of Tomen Corporation. Technofine® is a high-tech polyester yarn that has a specially designed "W" shape when viewed in cross section. The overlap of the "W" shape speeds up a fabric's ability to transport water away from your skin. Its increased surface area increases the evaporation rate.

TEFLON® is a registered trademark of E.I.DuPont de Nemours and Co. used under license by Invista. DuPont's Teflon® DWR Coating provides maximum water and stain repellency without affecting the breathability of the fabric it is applied to.

Thermaldress® is a registered trademark of Bellwether. The fabric regulates body temperature by construction. The inner surface of the fabric traps body heat inside the soft brushed inner surface and transfers moisture away to the outer surface for quick evaporation.

Back to the top

ULTRASUEDE® is a registered trademark of Toray Ultrasuede America Inc.®. The UltraSuede® brand represents a line of micro-fiber polyester based fabrics with the look and feel of genuine doeskin suede.

ULTREX® is a registered trademark of Burlington Industries, Inc. The Ultrex® brand represents a line of breathable, windproof, waterproof fabrics used in foul weather gear.
ULTREX® 2-Ply is a breathable, waterproof, windproof microporous coating that is applied to the inside face of Supplex® nylon. The coating is small enough to block out wind and rain, yet large enough to permit perspiration vapor molecules to escape.
ULTREX® 3-Ply is ULTREX® 2-Ply with Durapel® (a super water-repellent, durable finish) applied to the outside face of the Supplex® nylon.

Back to the top

WINDBLOC® see POLARTEC® WINDBLOC®

Back to the top

XALT® is a registered trademark of Burlington Industries, Inc. XALT® stands for Xtreme Allweather Laminate Technology. XALT® is a waterproof, breathable, windproof barrier that is laminated to the underside of shell fabrics. Durapel®, a fluorocarbon, water-repellent finish is applied to the shell fabrics puter surface.